Watch and device pedestals
Solid blocks and pedestals that lift a single watch, phone, or device to eye level, in matched heights for a counter set.
Electronics, Phone & Watch Displays
We manufacture custom acrylic watch and cell phone display stands, security displays and lockable cases for carrier retail, electronics brands and watch boutiques, from 100 pieces per design.
ISO 9001 · Manufacturing since 2008 · 2,000+ custom projects · Quote reply within 24 hours
- Viewing
- Cradles angled so the screen or dial faces the shopper
- Demo units
- Concealed cable and tether channels
- MOQ
- 100 pcs per design
- Sample
- USD 200–500, 3–5 days, never credited
- Production
- 15–20 days after sample approval
- Delivery
- FOB Shenzhen, CIF or DDP
Phone, tablet, and watch displays we make
Demo counters, phone walls, and watch counters use these six. Each card opens the product page with sizes and options.
Phone cradles and risers
Angled cradles and tiered risers that stagger phones, cases, and accessories so every device reads at a glance.
Two-tier countertop stand: $28 each at 100 pcs
Lockable display cases
Enclosed cases for flagship phones, smartwatches, and luxury timepieces — fully visible, accessed only with a key.
150 × 100 × 100 mm countertop case: from $6–12 at 500 pcs
Phone wall shelves
Wall and slatwall shelves for phone walls and accessory bays; no visible brackets.
300 × 150 mm shelf: $8 each at 100 pcs
Spec and price holders
Spec cards, price tags, and model callouts beside each device — countertop, wall, or freestanding.
A5 slant-back holder: $6.80 each at 100 pcs
Brochure and card holders
Pockets for plan brochures, warranty cards, and accessory information at carrier counters and electronics booths.
Prices are published FOB Shenzhen references for the named specification; your quote follows your drawing and device list. Selling jewelry rather than electronics? See jewelry displays.
Displays by product: Watch display standsHeadphone and earphone displays
Watch display stands
A retail watch display stand is a pedestal or C-ring cradle that holds a wristwatch dial-out at counter height, usually ordered as a matched set with price holders and a lockable case for the high-value pieces. We build watch display sets for watch retailers, boutiques and brands from 100 pieces per design.
| Formats | C-ring cradles, pedestals in staggered heights, strap pillows, angled pocket-watch arms, lockable countertop cases, 3- to 20-watch cases and wall panels |
|---|---|
| Fit | C-ring and cradle sized to the watch and closed-strap range; largest watch and thickest strap checked on the sample |
| Security | Key-lock countertop cases for high-value pieces; open cradles take the same tether hardware as phone stands |
| Material | A named cast-PMMA grade approved against your display lighting |
| Branding | Engraved or UV-printed logo on pedestal fronts; co-branded panels for partner showrooms |
| Closest published price | 300 × 200 × 250 mm, 5 mm UV-filtering case with magnetic lid: from $15–30 per unit at 200 pcs, FOB Shenzhen |
Delivered a 3-, 6-, 12- and 20-watch case family fitted to the buyer's watches, and a co-branded watch pedestal for auto showrooms.
Formats Display pedestalsLockable display casesCollectible display casesSign and price holders
How many watches should one acrylic display case hold?
As many as the lid span and access allow; common formats hold 3, 6, 12 or 20 watches. Each case size is its own drawing and its own 100-piece design, because lid stiffness, hinge position and cradle pitch change with the count.
Can one C-ring size fit both large and small watches?
Only within a range. The C-ring is sized from your largest watch and thickest closed strap, then checked with the smallest; a line with very different case sizes usually needs two ring sizes on the drawing.
Do you build watch displays for retail counters or only collector cases?
Both. Retail counters use pedestals, C-rings, price holders and lockable cases in one matched set; collector cases are lidded boxes with cradles. Send the counter footprint and watch count, and we draw the set around them.
Headphone and earphone displays
Headphone and in-ear monitor (IEM) displays are upright acrylic panels with hooks or a weighted stand with a storage base, built to your drawing from 100 pieces per design. A typical brief is a 200 × 148 × 100 mm clear panel that hangs several IEM sets above a base for boxed stock.
| Formats | Hook panels for earphones and IEMs, single headphone stands, counter units with a storage base |
|---|---|
| Inputs | Product sizes and weights, hooks per panel, cable routing and logo position |
Can an earphone display hold demo units and boxed stock together?
Yes. The upper panel carries hooks for demo sets and the base holds boxed stock; hook count, spacing and the base compartment are drawn from your product sizes and checked on the paid sample.
Electronics display orders we have delivered
Delivered device and console programs, shown anonymized with the figures published on each project page.
Delivered order
420 console display pieces, repeat order
- pieces shipped
- 420
- display SKUs
- 4
- production
- 16 d
A video-game chain's second order: a console enclosure that keeps dust off a powered demo unit and still vents its heat; zero re-samples on repeat SKUs.
Delivered order
Phone display stands for carrier retail
A modular stand built around the actual devices, the named security system, and interchangeable information cards, packed by store.
Delivered order
Custom device stand, drawing to sample
Device fit, center of mass, cable clearance, finish, and carton protection approved on the sample before bulk.
Every store got the same cradle, the same angle, the same clean cable run. That consistency is why we reordered.
More device and watch work: watch collector cases in four sizes · a co-branded watch pedestal for auto showrooms · magnetic components checked in bulk · a color-matched accessory board
What a device display has to solve
Phones, tablets, and watches are small, reflective, and expensive — the three things a display has to solve at once. Acrylic presents them at an angle so the screen or dial faces the shopper, stays optically clear so nothing distracts from the device, and pairs cleanly with anti-theft hardware and hidden charging cables.
- Viewing angle
- A device lying flat shows its edge, not its face. Cradles hold each phone or watch at the angle where the screen or dial reads from standing height.
- Security
- The cradle takes a standard recoiling tether, locking base plate, or alarm puck (sourced separately), so shoppers can lift the device without walking off with it. Full enclosure moves to a lockable case.
- Power and cables
- A concealed channel routes the USB charging cable and security tether down through the base, so every demo unit stays powered and the counter stays clean.
- Brand color
- UV print, silk-screen, hot stamping, or engraving; colored acrylic matched to a supplied PMS reference.
- Chains
- Spec-matched units in batches for a multi-store rollout — the same fixture, angle, and cable run in every location.
For a national rollout, see how we ran a 50-store acrylic display rollout; for enclosed protection, the acrylic cases hub.
Frequently Asked Questions
What is an acrylic phone or watch display stand?
An acrylic phone or watch display stand is a clear PMMA fixture that holds a device or timepiece at an angled viewing position so shoppers can see it without picking it up. We build cell phone display stands, tablet cradles, pocket watch display stands, and multi-tier watch pedestal sets — clear or colored acrylic, custom to your device dimensions, with a 100-piece MOQ.
Can you build anti-theft or security phone display stands?
Yes. For open retail floors, a mobile phone security display stand pairs the acrylic cradle with a standard retail-security mechanism — a recoiling tether, a locking base plate, or an alarm puck sourced separately. The acrylic holds the device at the viewing angle and routes the security cable and charging cable through a hidden channel. For fully enclosed protection of high-value units, we cross-build lockable cases — see our lockable display case.
Do your phone display stands include cable management for live demo units?
Yes. Carrier and electronics-brand buyers routinely ask us to route a USB power cable so demo phones and tablets stay charged on the wall. We build a concealed cable channel from the cradle down through the base, so the charging cable and any security tether stay hidden and the display reads clean.
What is the difference between a watch pillow, a watch pedestal, and a watch display stand?
A watch pedestal is a solid acrylic block or riser that lifts a single timepiece to eye level on a counter. An acrylic watch display stand is an angled cradle or C-ring that holds the watch face-out. A watch pillow is a soft insert that sits inside a case or on a pedestal to cushion the strap. We build all three and combine them into counter sets for boutiques and showrooms.
Can you match our brand color and print a logo on the stand?
Yes. We offer UV printing for full-color graphics, silk-screen printing for single-color logos, hot stamping for metallic finishes, and laser engraving. Colored acrylic is available in specified thicknesses, and we can match to a supplied PMS reference. Branded runs typically start at a 100-piece MOQ.
Do you sell enclosed display cases for electronics, or only open stands?
This page covers open display stands, risers, shelves, and pedestals for phones, tablets, and watches. For fully enclosed protection with a lock, see our acrylic cases hub and the lockable display case. If you sell jewelry rather than electronics or watches, our jewelry displays application page is the better fit.
Quote Your Phone or Watch Display Program in 24 Hours
From 100 watch pedestals to a national carrier phone-wall rollout, we build to your specs and reply within 24 hours with a detailed quote.