Smoke Shop Display Case Manufacturer

We are the manufacturer. Wetop Acrylic has manufactured in Shenzhen since 2008 — today a 5,000 m² ISO 9001 certified plant, with 65+ workers doing the cutting, bending, polishing, printing, and assembly in-house. An OEM smoke shop display program stays with the same factory from drawing review through sample approval and production inspection. That matters because lock fit, door clearance, and edge polish are the details a reseller cannot control — and because you talk to the people who actually cut the acrylic when a spec changes mid-run.

MOQ is 100 pieces per design. For a chain we produce every unit from one approved sample, so store 1 and store 40 get the same dimensions, same lock, same branding. Multi-store buyers usually split the run into batches keyed to store opening or reset dates — tell us the schedule and we confirm the batch plan with the quote.

Yes — a lockable vape display case is a standard build for us. Flat-key cam-locks are the default: of the three lock types we offer, cam-locks are the lowest-profile and lowest-cost, and the fastest for staff at a busy counter. Tubular locks are the upgrade for higher-value SKUs, because the seven-pin ring resists picking, raking, and bumping far better than a flat key. Field-resettable push-code combination locks suit shops where several staff share access and lost keys are the real cost. Keys can be keyed alike, keyed differently, or master-keyed across the whole order. One limit worth stating plainly: no acrylic case is forced-entry rated. Acrylic deters reach-in and walk-up theft, not a pry bar. Published references, FOB Shenzhen: a 150 × 100 × 100 mm countertop case in 3 mm clear with a magnetic lid is from $6–12 at 500 pieces, and a 600 × 400 × 1000 mm floor-standing lockable case in 8 mm clear is from $60–120 at 100 pieces; the lock type and size of your case set the final quote.

Yes. We reproduce age-verification notices, warning statements, and license numbers by UV printing for full-color, silk-screen for single-color, or laser engraving for a permanent frosted mark that will not scuff off the counter. You supply the exact wording your state or country requires and confirm it is correct — we reproduce it faithfully at the size and position you specify. We do not write or vet the wording ourselves.

They decide it. Rules differ by country and by state: some markets restrict open display of tobacco entirely, some require product behind the counter or inside a closed cabinet, and flavored-vape restrictions change what you can stock in the first place. The fixture follows from that — open wall shelving where display is permitted, a closed back-bar cabinet where it is not, a lockable case where product must be secured. Tell us the requirement you are working to and we build to it. We do not certify any fixture as legally compliant; that determination rests with your regulator and your compliance team.

We make cigar display cases; they are not humidors. Acrylic is a display material, not a sealed humidity-controlled environment, and we do not build Spanish cedar linings or humidification systems. In practice shops use acrylic for boxed and cellophane-wrapped cigars, singles moving to same-day sale, and the accessory wall — cutters, lighters, ashtrays, travel cases — while aging inventory stays in a walk-in or cabinet humidor. If you need controlled humidity, buy a humidor and use acrylic for everything around it.