Delivered Project · Dental Supply · United Kingdom

A Clear Dispenser Where the Hinge Shows From Both Sides

This acrylic dental wire dispenser order came from a UK dental and orthodontic trade supplier: 50 clear cast acrylic dispensers with 316 stainless steel hinges, mirror-polished on both sides, the buyer's logo and a protective inner box each. The buyer kept the sample construction and chose double-sided hinge polish for production, and the shipment was dispatched in 18 days and delivered.

Clear acrylic dental wire dispensers with hinged lids on polished stainless steel hinges, one lid open, holding straight orthodontic wires on a dental supply trade counter beside orthodontic pliers
dispensers, one design
50
stainless steel hinges
316
order to dispatch
18 days

Ordering a similar project

100
MOQ (pcs)
3-5d
Sample lead time
15-20d
Production lead time
24h
Quote response

This page describes a historical 50-unit order. For a new production order today, MOQ is 100 pieces per design. Paid samples normally take 3–5 days; sample fees are paid separately and never credited. Standard production takes 15–20 days after drawing, hardware, logo and sample approval. Wetop responds to a complete brief within 24 hours.

Key Takeaways

  1. A UK dental and orthodontic trade supplier ordered 50 clear acrylic wire dispensers of one design.
  2. Each dispenser has a clear cast PMMA body and a lid on 316 stainless steel hinges, mirror-polished on both sides because the inner face shows through the acrylic.
  3. The buyer's logo was applied to every unit, and each dispenser was packed in its own protective inner box.
  4. The approved sample set the construction; the buyer separately confirmed double-sided hinge polish for production.
  5. The order left by courier 18 days after placement; tracking went to the buyer the next day and delivery has been confirmed.

The Challenge

The buyer supplies the dental and orthodontic trade in the UK and wanted a clear acrylic wire dispenser carrying its own logo. A dispenser is a working product rather than a display piece: its lid is opened and closed every time it is used.

The clear lid exposes both faces of the hinges along its back edge. The buyer had approved the dispenser construction and wanted a polished finish on both faces of the production hinges.

Our Approach

The approved sample established the clear cast acrylic body and hinged lid. The buyer separately confirmed the finish change for the 50-piece order, which specified the buyer's logo and an individual protective inner box.

Hinges polished on both faces

A hinge is usually judged by the face you see. On a clear acrylic lid you see both. The 316 stainless steel hinges on this dispenser were mirror-polished on both sides, so the face behind the acrylic looks as finished as the one in front. 316 is a grade often chosen for its corrosion resistance where parts are cleaned often, and the hinge is the part of a dispenser that is handled most.

Cast acrylic for the body

The body is clear cast PMMA. Cast sheet machines and polishes to a clean, clear edge, which matters on a box whose job is to show what is inside. Our guide to cast versus extruded acrylic explains the difference for parts like this.

Recording the finish change

The approval covered the sample construction. The production order added double-sided mirror polish, so the sample and production finish needed separate records. Our sample approval checklist lists what to confirm on a sample so it can serve as the production standard.

Spec at a glance

Buyer
Dental and orthodontic trade supplier, United Kingdom
Product
Wire dispenser with hinged lid
Body
Clear cast acrylic (PMMA)
Hinges
316 stainless steel, mirror-polished on both sides
Branding
Buyer's logo applied to each unit
Quantity
50 dispensers, one design (historical order; current MOQ is 100 per design)
Sampling
Approved sample construction; double-sided hinge polish confirmed for production
Packing
Each dispenser in a protective inner box
Freight
Courier, tracking sent the day after dispatch; delivery confirmed

The Results

The 50 dispensers left our factory by courier 18 days after the order was placed; tracking went to the buyer the next day and delivery has been confirmed.

Delivered
50 clear acrylic wire dispensers, one design
Order to dispatch
18 days by courier
Tracking & receipt
Tracking sent the day after dispatch; delivery confirmed by the UK buyer
Hinge finish
Single-sided mirror polish on the approved sample; double-sided mirror polish specified for production

The production order carried forward the approved construction and recorded the new finish on both hinge faces.

Project note: A clear lid shows both faces of its hinges. Record which faces need polishing on the production specification.
Production recordWire dispenser order, UK dental and orthodontic trade supplier, courier shipment

What This Means for Your Project

If you supply clinics, labs or the professional trade, a branded acrylic dispenser or hinged box puts your name on something used every day. Three points from this order carry over.

Specify the hardware, not only the acrylic. Name the hinge material and finish on the drawing. On a clear part, say which faces need polishing.

Freeze the specification at sample approval. If nothing changes after the sample, production can follow it directly. If something changes, plan a new sample.

Plan the order at today's minimum. This was a historical 50-unit order; new production orders start at 100 pieces per design, after a paid sample.

We build clear acrylic boxes with hinged lids and other custom acrylic boxes to your drawing. The equipment and lab parts page covers covers, enclosures and lab parts, and the foam-lined component box case shows another working box built for a professional buyer.

Common Questions

Three questions trade suppliers ask most often about a branded acrylic dispenser.

Why use 316 stainless steel hinges on an acrylic dispenser?

The two hinges run along the back edge of the clear lid. The production specification called for 316 stainless steel and mirror polishing on both faces because the acrylic leaves both faces visible.

What changed between sample approval and production?

The approved sample had single-sided mirror polish on the hinges. The buyer kept the sample construction and separately approved double-sided mirror polish for the 50 production units.

Can you make fewer than 100 acrylic dispensers?

This order was 50 units of one design. For a new production order, our standard minimum is 100 pieces per design. A paid sample comes first, normally in 3–5 days, paid separately and never credited, and production takes 15–20 days after the sample is approved.

Need a branded dispenser for the trade?

Send the drawing or reference photos, the hinge and hardware you want, the logo file, the quantity, and how each unit should be packed. We will quote a paid sample and production.

Paid samples in 3–5 days · Fees paid separately and never credited · Production in 15–20 days after approval · MOQ 100 pieces per design · Response within 24 hours